5–Boot Configuration
iBFT Boot Setup
217
CU0354602-00 L
2.
Select
System BIOS Settings
, then select
Boot Settings
, then select
BIOS
Boot Settings
, and then select
Hard-Disk Drive Sequence
, as shown in
Figure 5-34
.
Figure 5-34. Selecting iSCSI Boot Sequence
3.
In the pop-up window, use the UP ARROW and DOWN ARROW or
the
+
and
–
buttons to move the iSCSI target to the top of the list, as
shown in
Figure 5-35
(where the iSCSI target is configured on Port 1,
Partition 3). Then click
OK
.
Figure 5-35. Setting the iSCSI Boot Sequence
