Windows NIC Driver Management Applications: QLogic QME8242 Mezzanine Card User's Guide
file:///T|/htdocs/NETWORK/QLogic/71922/en/windrivr.htm[9/26/2012 4:25:48 PM]
Port_Alias
Port_Physical_MAC_Alias
Port_LAA_MAC_Alias
You can change the variables listed in
Table 1
; however, some variables cannot be changed on specific OSs or configuration
states. To determine which ones can be changed, use the -c keyword.
Table 1. Port Adapter Variables and Values
Variable
Values
Checksum_Offload_Enable
on, off
IPv4_Checksum_Offload_Enable
off, Rx, Tx, RxTx
IPv4_TCP_Checksum_Offload_Enable
off, Rx, Tx, RxTx
IPv6_TCP_Checksum_Offload_Enable
off, Rx, Tx, RxTx
IPv4_UDP_Checksum_Offload_Enable
off, Rx, Tx, RxTx
IPv6_UDP_Checksum_Offload_Enable
off, Rx, Tx, RxTx
Large_Send_Offload_Enable
on, off
IPv4_Large_Send_Offload_v1_Enable
on, off
IPv4_Large_Send_Offload_v2_Enable
on, off
IPv6_Large_Send_Offload_v2_Enable
on, off
Receive_Side_Scaling_Enable
on, off
Header_Data_Split_Enable
on, off
Jumbo_Frames_MTU_9000_Enable
on, off
Jumbo_Frames_MTU_9000_Enable_Rx on, off
Jumbo_Frames_MTU_9000_Enable_Tx on, off
LOCAL_Administered_Address_MAC
xx:xx:xx:xx:xx:xx
Port_Wake_On_LAN_Option
0=Disabled, 1=Wake on Magic Frame
VLAN_ID
1..4094
To set the QME8242 configuration alias, issue the following command:
qaucli -nic -nh [
cna_port_inst
] <
config_name|config_alias
> <
value
> [<
config_name|config_alias
>
<
value
>]
Please read all
restrictions and disclaimers
.
Back to Contents Page
