40
│
Operating the monitor
Input Source
Selects between the different video signals that may
be connected to your monitor.
USB-C
Select the
USB-C
input when you are using the USB
Type-C connector. Press the
button to confirm
the selection.
HDMI 1
Select the
HDMI 1
or
HDMI 2
input when you are
using the HDMI connector. Press the
button to
confirm the selection.
HDMI 2
Auto Select
Automatically scans for available input sources. Press
the
button to confirm the selection.
Auto Select for
USB-C
Allows you to set Auto Select for USB-C to:
•
Prompt for Multiple Inputs
: Always displays
the “
Switch to USB-C Video Input
” message
for you to choose whether to switch or not.
•
Yes
: Always switches to USB-C video input
(without asking) when the USB Type-C cable is
connected.
•
No
: Never automatically switches to USB-C video
input when the USB Type-C cable is connected.
NOTE:
Press the
button to confirm the selection.
The option is available only when
Auto Select
is on.
Reset Input
Source
Resets your monitor input settings to the factory
settings.