Install the Storage System in a Rack
Install the storage system and other Storage Center system components in a rack.
About this task
Mount the storage system and expansion enclosures in a manner that allows for
expansion in the rack and prevents the rack from becoming top
‐
heavy.
The SC5020 storage system ships with a ReadyRails II kit. The rails come in two
different styles: tool-less and tooled. Follow the detailed installation instructions
located in the rail kit box for your particular style of rails.
NOTE: Dell recommends using two people to install the rails, one at the
front of the rack and one at the back.
Steps
1.
Position the left and right rail end pieces labeled FRONT facing inward.
2.
Align each end piece with the top and bottom holes of the appropriate U space.
Figure 2. Attach the Rails to the Rack
3.
Engage the back end of the rail until it fully seats and the latch locks into place.
6
