18
│
About your monitor
Electrical specifications
Model
SE2722HR
Video input signals
HDMI 1.4, 600mV for each differential line,100 ohm
input impedance per differential pair
Analog RGB, 0.7 Volts +/-5%, positive polarity at 75
ohm input impedance
AC input voltage/
frequency/current
100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz / 1.6 A
(max.)
Inrush current
120 V: 30 A (max.) at 0°C (cold start)
240 V: 60 A (max.) at 0°C (cold start)
Power consumption
0.3 W (Off mode)
1
0.3 W (Standby Mode)
1
17 W (On Mode)
1
22 W (Max.)
2
16.5 W (Pon)
3
51.5 kWh (TEC)
3
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting.
3
Pon: Power consumption of On Mode measured with reference to Energy Star
test method.
TEC: Total energy consumption in kWh measured with reference to Energy Star
test method.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
