background image

Back to Contents Page

  

 

Appendix  

Dell™ SP2008WFP Flat Panel Monitor

 

  

Safety Instructions

 

  

FCC Notice (U.S. Only) and Other Regulatory Information

 

  

Contacting Dell

 

 

 

CAUTION: Safety Instructions 

For safety instructions, see the 

Product Information Guide

FCC Notice (U.S. Only) and Other Regulatory Information 

For FCC Notice and other regulatory information, see the regulatory compliance website located at www.dell.com/regulatory_compliance. 

Contacting Dell 

For customers in the United States, call 800-W W W-DELL (800-999-3355). 

Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be 
available in your area. To contact Dell for sales, technical support, or customer service issues: 

Back to Contents Page

 

CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, 
electrical hazards, and/or mechanical hazards. 

NOTE: 

If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, 

or Dell product catalog. 

1.

Visit

 support.dell.com

2.

 

Verify your country or region in the 

Choose A Country/Region

 drop-

down menu at the bottom of the page.  

3.

Click 

Contact Us

 on the left side of the page.

4.

Select the appropriate service or support link based on your need.

5.

 

Choose the method of contacting Dell that is convenient for you.

Summary of Contents for SP2008WFP - 20" LCD Monitor
































Reviews: