5. Disassembly and Assembly Procedures
Use a Philips-head screwdriver to remove
screws for interface board and power board.
8pcs
(No.1 screw size=M4x8, Torque=7
±1
kgfxcm;
No.2~8 screw size=M3x7.5, Torque=7
±1
kgfxcm)
S16
Remove the power board board and interface
board from the
disconnect all of the cables.
bracket chassis module carefully,
and then
Release the panel lamp cables from the hooks of the
bracket, then remove the Mylar tape from the hooks
of the bracket.
S15
S17
Take away the bracket chassis module and then put
the bracket chassis module on a protective cushion.
S14
1
3
4
2
6
8
7
5
