5. Disassembly and Assembly Procedures
S10
S9
S11
S8
Tear off the tape on the middle bezel for releasing the
LED cable, and then tear off the mylar tape to release
the LED board for the hooks of the middle bezel.
U
.
se a Philips-head screwdriver to remove 4pcs
screws for unlocking the bracket chassis module
with the panel
(No.1~4 Screw size= M3x5, Torque=5
±0.5
kgfxcm)
4
2
3
1
Lift up the middle bezel, and then put it on a cushion
foam for later disassembling.
S12
Use a Philips-head screwdriver to remove
18(13+5)pcs screws for unlocking the middle bezel
with the panel module.
(No.1~13 screw size=M3x5, Torque=5
±
0.5
kgfxcm;
No.13~18 screw size=M3x4.5, Torque=5
±
0.5
kgfxcm)
Disconnect the two panel lamp cables from the
connectors of the panel. Disconnect the LED cable
from the connector of the interface board.
13
18
16
15
17
10
2
12
4
11
7
6
1
5
8
9
3
14
Move up the bracket, then push the earing-lock and
disconnect the LVDS cable away from the connectors
of the panel module.
S13
