Setting Up the Monitor
│
31
•
Use the
button to select
Disable
and change the settings.
Repeat the above steps to change the HDMI format settings if necessary.
Connecting the DisplayPort (DP to DP) cable
NOTE: The default out of factory setting in the U3419W is DP1.2. If the
monitor fails to show any content after the DP cable is connected,
follow the procedures below to change the settings from DP1.2 to
DP1.1:
•
Press second button next to the
button to activate the OSD menu.
•
Use the
and
buttons to highlight
Input Source
, then use the
button enter the submenu.
•
Use the
and
buttons to highlight
DP
.
•
Press and hold the
button for approximately 10 seconds, and the DP
configuration message appears.
