20
│
About Your Monitor
Environmental Characteristics (Continued)
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC,
the monitor can automatically reduce its power consumption when not in use. This
is referred to as
Power Save Mode
*. If the computer detects input from the
keyboard, mouse, or other input devices, the monitor automatically resumes
functioning. The following table shows the power consumption and signaling of this
automatic power saving feature.
* Zero power consumption in OFF mode can only be achieved by disconnecting the
main cable from the monitor.
** Maximum power consumption with max luminance, and USB active.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making decisions
about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
Altitude
Operating
3,048 m (10,000 ft) (maximum)
Non-operating
12,192 m (40,000 ft) (maximum)
Thermal dissipation
• 784.76 BTU/hour (maximum)
• 150.13 BTU/hour (typical)
VESA
Modes
Horizontal
Sync
Vertical
Sync
Video
Power
Indicator
Power
Consumption
Normal
operation
Active
Active
Active
White
230 W
(maximum)**
44 W (typical)
Active-off
mode
Inactive
Inactive
Blanked White
(blinking)
Less than 0.5 W
Switch off
-
-
-
Off
Less than 0.3 W
Power Consumption P
on
38 W
Total Energy Consumption (TEC)
130.74 kWh
