Dell Open Source Guide
4) In a cmd window, type “fastboot devices” and you should see the screen.
5) Download droidboot.img and A195/boot.img (or you can use boot.img you build), put it
in the directory which contains your built boot.img.
6) Go to the directory contains “boot.img” and run these commands.
\> fastboot flash boot boot.img
\> fastboot flash fastboot droidboot.img
\> fastboot reboot
7) After the device is rebooted, confirm if the image is properly flashed. Go to Settings-
>About tablet and make sure if the information in Kernel version is right.
Page
12
of
13