Dell Open Source Guide
Dell Tablet Flash Notes
Welcome to the Dell Open Source Guide. Here you'll find the guide that describes on how to
download, build and flash the appropriate kernel for Dell Venue7 3740/Venue8 3840 tablet
device.
* For Wi-Fi/LTE device on A195
Prerequisite System Setup
1) Operating Systems
Windows 7
Windows 8.1 desktop mode
2)
A micro-SD c
ard of 1GB or higher.
3) All anti-virus software should be disabled when to flash SW into device.
4) Download and install Dell driver and the flashing tool:
IntelAndroidDrvSetup1.5.0.exe
P708T_Driver_V1.0.0.msi
iSocUSB-Driver-Setup-1.0.4.zip
xFSTK_downloader_1.5.1.zip
* You MUST do “Flash A195 image to the tablet” part firstly if your tablet's build number
is not “YTP802A119500” or “YTP802A519500”. (Build number is here: Settings ->About
tablet ->Build number)
* WARNING: The data on the tablet device will be LOST when to flash A195 image, please
make sure you have already backed up data of device firstly.
A. Flash A195 image to the tablet
1)
Download and extract tar package, for A195 Wi-Fi, is A195/Unbrick/YTP802A119500-
2014-07-16-22.tgz
; for A195-LTE, is A195/Unbrick/YTD802A519500-2014-07-16-
16.tgz.
2) Open Flash Tool “xFSTK-Downloader”, and set configuration for each s dection.
Page
2
of
13
