4.
Align the system board with the screw holders on the computer.
5.
Tighten the screws to secure the system board to the computer.
6.
Close the hinge and tighten the screws to secure the system board to the computer.
7.
Turn the computer over and open the computer and connect the optical drive cable and the touch
pad cable to the system board.
8.
Install the:
a.
b.
c.
d.
e.
f.
g.
h.
i.
9.
After working inside your computer
.
Removing the power connector
1.
Before working inside your computer
2.
Remove the:
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
3.
To remove the power connector:
a. Remove the black adhesive tape and unroute the power cable [1].
b. Remove the screw that secures the power connector to the computer [2].
c. Lift the power connector.
29