Installing the Input/Output board
1.
Connect the input/output (I/O board) cable to the I/O board.
2.
Replace the black adhesive tape to secure the i/o board cable.
3.
Turn the I/O board over and align it with the screw holder on the computer.
4.
Insert the I/O board into the computer.
5.
Tighten the screw to secure the I/O board to the computer.
6.
Install the:
a.
b.
c.
d.
7.
After working inside your computer
.
Removing the speakers
1.
Before working inside your computer
2.
Remove the:
a.
b.
c.
d.
3.
To remove the speakers:
a. Disconnect the speaker cable [1].
b. Unroute the cables and remove the speakers from the computer [2].
24