1.
screws (4)
2. speakers (2)
3. speaker cable
Replacing the Speakers
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
Before Working Inside Your Computer
. After working
inside your computer, follow the instructions in
After Working Inside Your Computer
. For more
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Procedure
1.
Align the screw holes on the speakers with the screw holes on the display-panel base.
2.
Replace the screws that secure the speakers to the display-panel base.
3.
Route the speaker cables through the routing guide on the display-panel base.
4.
Connect the speaker cable to the system board.
Post-requisites
1.
Replace the
speaker cover
.
2.
Replace the
back cover
.
3.
Replace the
stand assembly
.
Removing the Memory Module(s)
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
Before Working Inside Your Computer
. After working
inside your computer, follow the instructions in
After Working Inside Your Computer
. For more
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
18
Summary of Contents for vostro 23-3340
Page 1: ...Dell Vostro 23 3340 Owner s Manual Regulatory Model W10C Regulatory Type W10C001 ...
Page 7: ...System Setup Options 70 Flashing the BIOS 80 5 Specifications 81 6 Contacting Dell 84 ...
Page 63: ...20 Replace the memory module s 21 Replace the back cover 22 Replace the stand assembly 63 ...
