Replacing the Hard Drive
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
Before Working Inside Your Computer
. After working
inside your computer, follow the instructions in
After Working Inside Your Computer
. For more
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.
Procedure
1.
Align the screw holes on the hard-drive cage with the screw holes on the system board.
2.
Replace the screws that secure the hard-drive cage to the system board.
3.
Replace the hard-drive bracket to the hard drive.
4.
Align the tabs on the hard-drive assembly with the slots on the hard-drive cage.
5.
Slide the hard-drive assembly into the hard-drive cage until it snaps into position.
Post-requisites
1.
Replace the
system-board shield
.
2.
Replace the
back cover
.
3.
Replace the
stand assembly
.
Removing the VESA-Mount Bracket
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
Before Working Inside Your Computer
. After working
inside your computer, follow the instructions in
After Working Inside Your Computer
. For more
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Prerequisites
1.
Remove the
stand assembly
.
2.
Remove the
back cover
.
3.
Remove the
system-board shield
.
Procedure
1.
Remove the screws that secure the VESA-mount bracket to the display-panel base.
2.
Lift the VESA-mount bracket off the display-panel base.
25
Summary of Contents for vostro 23-3340
Page 1: ...Dell Vostro 23 3340 Owner s Manual Regulatory Model W10C Regulatory Type W10C001 ...
Page 7: ...System Setup Options 70 Flashing the BIOS 80 5 Specifications 81 6 Contacting Dell 84 ...
Page 63: ...20 Replace the memory module s 21 Replace the back cover 22 Replace the stand assembly 63 ...
