1.
Mini Card slot
2. wireless card
3. antenna cables
4. screw
Replacing the Wireless Card
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
Before Working Inside Your Computer
. After working
inside your computer, follow the instructions in
After Working Inside Your Computer
. For more
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Procedure
1.
Align the notch on the wireless card with the tab on the Mini Card slot.
2.
Slide the wireless card at an angle into the Mini Card slot.
3.
Press the other end of the wireless card down and replace the screw that secures the wireless card
to the system board.
4.
Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card supported by
your computer:
Connectors on the wireless card
Antenna-cable color
Main (white triangle)
White
Auxilary (black triangle)
Black
Post-requisites
1.
Replace the
system-board shield
.
2.
Replace the
back cover
.
3.
Replace the
stand assembly
.
33
Summary of Contents for vostro 23-3340
Page 1: ...Dell Vostro 23 3340 Owner s Manual Regulatory Model W10C Regulatory Type W10C001 ...
Page 7: ...System Setup Options 70 Flashing the BIOS 80 5 Specifications 81 6 Contacting Dell 84 ...
Page 63: ...20 Replace the memory module s 21 Replace the back cover 22 Replace the stand assembly 63 ...
