Replacing the Coin-Cell Battery
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
Before Working Inside Your Computer
. After working
inside your computer, follow the instructions in
After Working Inside Your Computer
. For more
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Procedure
With the positive-side facing up, insert the coin-cell battery into the battery socket and press down the
battery into place.
Post-requisites
1.
Replace the
system-board shield
.
2.
Replace the
back cover
.
3.
Replace the
stand assembly
.
Removing the I/O Bracket
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
Before Working Inside Your Computer
. After working
inside your computer, follow the instructions in
After Working Inside Your Computer
. For more
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Prerequisites
1.
Remove the
stand assembly
.
2.
Remove the
back cover
.
3.
Remove the
system-board shield
.
4.
Remove the
VESA-mount bracket
.
5.
Remove the
power-supply diagnostic board
.
Procedure
1.
Remove the screws that secure the power port to the I/O bracket.
2.
Remove the screws that secure the I/O bracket to the display-panel base.
35
Summary of Contents for vostro 23-3340
Page 1: ...Dell Vostro 23 3340 Owner s Manual Regulatory Model W10C Regulatory Type W10C001 ...
Page 7: ...System Setup Options 70 Flashing the BIOS 80 5 Specifications 81 6 Contacting Dell 84 ...
Page 63: ...20 Replace the memory module s 21 Replace the back cover 22 Replace the stand assembly 63 ...
