9.
Replace the jumper on the pins 2 and 3.
10. Install the cover.
11. Follow the procedures in
After Working Inside Your Computer
.
12. Power-on the computer.
13. Go to the system setup, and assign a new system or setup password.
Clearing CMOS Passwords
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Identify the CMOS password reset jumper on the system board, see the System Board Layout.
4.
Remove the 2-pin jumper plug from pins 2 and 3 and fix it on pins 1 and 2
5.
Install the cover.
6.
Connect the computer to the electrical outlet and power-on the computer to clear the password.
7.
Power-off the computer and disconnect the power cable from the electrical outlet.
8.
Remove the cover.
9.
Replace the jumper on the pins 2 and 3.
35
Summary of Contents for Vostro 270
Page 1: ...Dell Vostro 270 Owner s Manual Regulatory Model D11M Regulatory Type D11M002 ...
Page 28: ...28 ...
Page 40: ...40 ...