Back to Contents Page
Coin-Cell Battery
Dell™ 500 Service Manual
Removing the Coin-Cell Battery
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide
.
1. Follow the instructions in
Before You Begin
.
2. Remove all memory modules (see
Removing Memory Module(s)
).
3. Remove the hard drive (see
Removing the Hard Drive
).
4. Remove the optical drive (see
Removing the Optical Drive
).
5. Remove Mini-Card (see
Removing Mini-Card
).
6. Remove the center control cover (see
Removing the Center Control Cover
).
7. Remove the keyboard (see
Removing the Keyboard
).
8. Remove the display assembly (see
Removing the Display Assembly
).
9. Remove the internal card with Bluetooth wireless technology, if installed (see
Removing the Internal Card With
Bluetooth® Wireless Technology
).
10. Remove the palm rest (see
Removing the Palm Rest
).
11. Remove the ExpressCard cage (see
Removing the ExpressCard Cage
).
12. Remove the processor thermal-cooling assembly (see
Removing the Processor Thermal-Cooling Assembly
).
13. Remove the processor (see
Removing the Processor Module
).
14. Remove the system board (see
Removing the System Board Assembly
).
15. Use a plastic scribe to pry up the coin-cell battery from the slot.
