Installing the battery
1
Insert the battery into the slot on the computer.
2
Connect the battery cable to the connector on the system board.
3
Connect the hard disk drive cable to the connector on the system board and close the latch.
4
Replace the four M2.0 x 3 screws to secure the battery to the system.
5
Install the
.
6
Follow the procedure in
After working inside your computer
.
Speaker
Removing the speaker
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
3
To remove the speaker:
a Disconnect the speaker cable [1].
b Unroute the cable from routing channel [2].
4
Lift the speakers, along with the speaker cable, and remove it away from the back cover.
12
Removing and installing components
