Installing the M.2 Solid State Drive — SSD
1
Align the notch on the solid-state drive with the tab on the solid-state drive slot.
2
Slide the solid-state drive into the slot.
3
Replace the M2.0 x 3 screw to secure the SSD to the system.
4
Install the
.
5
Follow the procedure in
After working inside your computer
.
WLAN card
Removing the WLAN card
1
Follow the procedure in
Before working inside your computer
.
2
Remove the
3
To remove the WLAN card:
a Remove the M2.0 x 3 screw that secures the WLAN card to the system [1].
b Remove the tab that secures the WLAN cables [2].
c Disconnect the WLAN antenna cables from the WLAN card [3].
d Lift the WLAN card away from the connector [4].
Removing and installing components
15
