Installing the Input output board
1
Place the Input output(I/O) board to its slot in the system.
2
Replace the two M2.0 x 2 screws to secure the I/O board to the system board.
3
Connect the I/O cable and close the latch to secure it to the I/O board.
4
Push down the display hinge above the I/O board and secure it with the two M2.5 x 6 screws to the system.
5
Install the:
a
b
6
Follow the procedure in
After working inside your computer
.
Power button
Removing the power button
1
Follow the procedure in
Before working inside your computer
.
2
Remove the: .
a
b
c
d
3
To remove the power button:
a Remove the two M2.0 x 2.5 screws securing the power button to the system [1].
b Lift the button away from the system [2].
20
Removing and installing components
