Installing the display panel
1
Connect the eDP cable to the connector.
2
Affix the adhesive tape to secure the eDP cable.
3
Replace the display panel to align with the screw holders on the display assembly.
4
Replace the four screws to secure the display panel to the display assembly.
5
Install the:
a
b
c
d
6
Follow the procedure in
After working inside your computer
.
Display hinges
Removing display hinge
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
d
e
3
To remove the display hinge:
a Remove the eight M2.5 x 4 screws that secure the display hinge to the display assembly [1].
b Lift the display hinge away from the display assembly [2].
32
Removing and installing components