Power management
Table 9. Power Management
Option
Description
AC Behavior
Allows you to enable or disable the computer from turning on automatically when an AC adapter is
connected.
•
Wake on AC
This option is not set by default.
Enable Intel Speed Shift
Technology
Allows you to enable or disable the Intel Speed Shift Technology.
•
Enabled
—Default
Auto On Time
Allows you to set the time at which the computer must turn on automatically.
The options are:
•
Disabled
—Default
•
Every Day
•
Weekdays
•
Select Days
This option is not set by default.
USB Wake Support
Allows you to enable USB devices to wake the system from standby.
•
Enable USB Wake Support
This option is not set by default.
Peak shift
This option minimizes AC power usage at times of peak demand.
Primary Battery Charge
Configuration
Allows you to select the charging mode for the battery.
The options are:
•
Adaptive
—Default
•
Standard
- Fully charges your battery at a standard rate.
•
Primarily AC use
•
Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
NOTE:
All charging mode may not be available for all the batteries. To enable this option,
disable the Advanced Battery Charge Configuration option.
System setup
57