Steps
1. Align the graphics card with the PCI-Express card connector on the system board.
2. Using the alignment post, connect the graphics card in the connector and press down firmly. Ensure that the card is firmly
seated.
3. Lift the pull tab to close the PCIe door.
Next steps
1. Install the
.
after working inside your computer
.
Hard drive assembly
Removing the 3.5-inch hard drive
Prerequisites
Before working inside your computer
.
2. Remove the
.
Disassembly and reassembly
27
Summary of Contents for Vostro 5890
