cage with the 4 hooks on the ODD bracket and place it into its slot on the chassis. Secure the hard-drive assembly
to the chassis with two (6-32) screws. Connect and route the hard-drive power extension cable, 3.5-inch SATA cable,
2.5-inch hard drive and ODD SATA cable and CPU power cable through the cable holder clip.
Next steps
1. Install the
.
After working inside your computer
.
Coin-cell battery
Removing the coin-cell battery
Prerequisites
Before working inside your computer
.
2. Remove the
.
About this task
The following images indicate the location of the coin-cell battery and provide a visual representation of the removal procedure.
Steps
1. Lay the computer on the right side.
2. Using a plastic scribe, gently pry the coin-cell battery out of the slot on the system board.
3. Remove the coin-cell battery.
Installing the coin-cell battery
Prerequisites
30
Disassembly and reassembly
Summary of Contents for Vostro 5890
