Steps
1. Align the ports on the system board with the slots on the chassis and align the system board in place.
2. Replace the single (M2x4) standoff screw that secures the system board to the chassis.
3. Replace the eight (6-32) screws that secure the system board to the chassis.
4. Route and connect all the cables that you disconnected from the system board .
5. Align the screw holes on the ports bezel with the screw holes on the chassis.
6. Replace the single (6-32) screw that secures the ports bezel to the chassis.
Next steps
1. Install the
.
2. Install the
.
3. Install the
4. Install the
5. Install the
6. Install the
.
7. Install the
.
8. Install the
.
After working inside your computer
.
50
Disassembly and reassembly
Summary of Contents for Vostro 5890
