This feature is applicable for supported dual monitor capable thin clients only.
a.
Dual Head
—Select
Mirror Mode
to have the two monitors work in a matching state, or
Span Mode
to have the two
monitors work separately second is extended from first.
b.
Main Screen
—Select which of the two monitors you want to be the main screen (
Screen1
or
Screen2
). The other screen
is extended from the main screen.
c.
Layout
—Select how you want the two monitors to be oriented to each other.
Horizontal
— where you move between the monitors from the left and right of the screens.
Vertical
— where you move between the monitors from the top and bottom of the screens.
d.
Alignment
— Select how you want the monitors to be aligned
Bottom
,
Center
, or
Top
.
Bottom means screens are bottom-aligned in a horizontal orientation; Center means screens are center-aligned; Top means
screens are top-aligned in a horizontal orientation.
e.
Taskbar (Classic Desktop Only)
—Select under which screen you want the taskbar to appear
Whole Screen
or
Main
Screen
Gamma Supported Monitors Only
— Use the Gamma Setup tab to adjust the saturation values for Red, Green and Blue on
VGA connected monitors supporting gamma settings, if you feel the default settings are too light. Be aware that the Gamma
Setup tab will be disabled once you click
Save+Exit
. You can enable it again by setting rgamma={1-100} ggamma={1-100}
bgamma={1-100} in the Resolution INI parameter. For more information, see
Dell Wyse ThinOS INI Guide
.
6
