Opening and closing the system
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Removing the system cover
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Turn off the system, including any attached peripherals.
3.
Disconnect the system from the electrical outlet and disconnect the peripherals.
1.
Remove the securing screw from the system cover.
2.
Press the cover release latch lock.
3.
Hold the system cover on both the sides with your palm on the traction pad, and slide out the system
cover.
4.
Lift the cover away from the system.
Figure 9. Opening and closing the system
1.
system cover
2. securing screw
3. traction pad
4. cover release latch lock
Install the system cover.
37
