Replacing the heat sink
AVISO: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
. After working inside your computer, follow the
instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
.
PRECAUCIÓN: Incorrect alignment of the heat sink can damage the system
board and processor.
NOTA: If either the system board or the heat sink is replaced, use the
thermal pad/paste provided in the kit to ensure that thermal conductivity is
achieved.
Procedimiento
1
Alinee los orificios para tornillos del disipador de calor con los de la placa base.
2
Coloque los tornillos que fijan el disipador de calor a la placa base en el orden
inverso (tal como se indica en el disipador de calor).
Requisitos posteriores
1
2
41
Summary of Contents for XPS 13
Page 1: ...XPS 13 Service Manual Computer Model XPS 9360 Regulatory Model P54G Regulatory Type P54G002 ...
Page 27: ...2 Coloque la cubierta de la base 27 ...
Page 32: ...Requisitos posteriores 1 Coloque la batería 2 Coloque la cubierta de la base 32 ...
Page 90: ...Procedure After performing all the pre requisites we are left with the palm rest assembly 90 ...
