Replacing the Memory Module(s) |
43
Replacing the Memory Module(s)
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1
Align the notch on the memory module with the tab on the
memory-module connector.
2
Slide the memory module firmly into the connector at a 45-degree angle
and press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Postrequisites
1
Replace the battery. See "Replacing the Battery" on page 17.
2
Replace the base-cover assembly. See "Replacing the Base-Cover Assembly" on
page 12.
