background image

After you have updated the firmware, verify that all components are running the correct version. To verify the firmware version,
use the 

ONIE:~ # onie-sysinfo -F

 command. For example:

ONIE:~ # onie-sysinfo -F

BIOS version:x.xx.x.x-x

CPU_CPLD version:x.x

PORT_01_16_CPLD version:x.x

PORT_17_34_CPLD version:x.x

FPGA version:x.x

MAIN-BMC firmware version:x.xx

Support resources

The following support resources are available for the Z9432F-ON switch:

Documentation resources

For more information about using the Z9432F-ON switch, see the following documents at 

https://www.dell.com/support

:

Dell EMC PowerSwitch Z9432F-ON Installation Guide

Dell EMC PowerSwitch Z9432F-ON Set-Up Guide

Dell EMC PowerSwitch Z9432F-ON Release Notes

Dell EMC PowerSwitch Z9432F-ON DIAG OS and Tools Release Notes

Dell EMC PowerSwitch Z9432F-ON BMC Guide

Open Networking Hardware Diagnostic Guide

Dell EMC SmartFabric OS10 Release Notes

Dell EMC SmartFabric OS10 User Guide

For more information about the open network installation environment (ONIE)-compatible third-party operating system, see

https://onie.org

.

Contacting Dell EMC

The Dell EMC support site provides documents and tools to help you use Dell EMC equipment and mitigate network outages.
Through the support site you can obtain technical information, access software upgrades and patches, download available
management software, and manage your open cases. The Dell EMC support site provides integrated, secure access to these
services.

Dell EMC provides several online and telephone-based support and service options. Availability varies by country and product,
and some services may not be available in your area.

To access the Dell EMC support site, go to 

www.dell.com/support/

. To display information in your language, scroll down to the

bottom of the web page and select your country from the drop-down menu.

To obtain product-specific information, enter the 7-character Service Tag or 11-digit express service code of your switch,
which is found on the pull-out tag, also known as a luggage tag, and click 

Submit

.

To receive more technical support, click 

Contact Us

. On the Contact Information web page, click 

Technical Support

.

To access product documentation and resources for specific Dell EMC Networking switches, see the 

Dell EMC Networking

OS10 Info Hub

.

To search for drivers and downloads, go to the 

Drivers and Downloads

 section for your switch at 

www.dell.com/drivers/

.

To participate in Dell EMC community blogs and forums, go to 

www.dell.com/community

.

12

Summary of Contents for Z9432F-ON ONIE













Reviews: