3 |
3 |
P a g e
Using the Fridge
•
NOTE: IF THE UNIT IS POWERED OFF ONLY AN ORANGE LED WILL BE
ILLUMINATED. TO TURN ON YOUR UNIT PLEASE HOLD THE ON/OFF
SWITCH DOWN UNTIL THE RUN LIGHT CHANGES TO GREEN AND THE LED
DISPLAY IS ILLUMINATED.
•
Temperature setting range
：
-18ºC
～
10ºC, 0ºF
～
50ºF
；
•
Plug in the DC or AC power cable. Use the ON/OFF switch to run the fridge. The LED
display on the control panel will light up and the interior temperature will be displayed.
•
Press SET and then press the
△
UP and
▽
DOWN buttons to adjust the temperature. Press the
button
△
to increase while the button
▽
to decrease the temperature. To lock in the target
temperature press set three times or leave for 5 seconds. The display board will display the
current temperature inside the unit after the target temperature is set. After approximately 5
minutes the displayed temperature will start to decrease.
•
If the power supply is cut off, the refrigerator will switch off automatically and then
automatically switch on again when the unit receives power.
•
To change the fridge between ºC and ºF. Press SET twice and then
△
UP or
▽
DOWN to
change the setting.
•
To change the battery voltage setting press the SET button three times and the use the
△
UP
and
▽
DOWN buttons to change between the settings. Leave the unit for 5 seconds to set this
setting. The three voltage settings are as follows :- (We advise to keep the setting on LOW)
o
LOW – 11.0Volts
o
MED – 12.0 Volts
o
HIGH – 12.5 Volts
Instruction Manual
P a g e
