BLE Remote PTT Model No. Blu-PTT+
1.Power on: Press Power Button and hold it for 5 seconds, and do not release it until LED Indicator flashes in red and blue
alternately.
2.Power off: When it is out of connection, Press Power Button for 5 seconds or wait 5 minutes, then it will power off.
3.Pairing mode:Press and hold
Power Button
about 5 seconds to power on, then it accesses default broadcasting mode
(pairing mode) with LED Indicator flashing in red and blue alternately. If double press Power Button, it accesses scanning
mode with LED Indicator flashing in blue.
4.Batter status: LED Indicator can show battery status immediately after Blu-PTT+ is powered on (before accessing pairing
mode). E.g.
LED Indicator flahes in red twice that signals lower than 25% battery;
LED Indicator flahes in violet (red and blue mixed) twice that signals 25%-50% battery;
LED Indicator flahes inviolet (red and blue mixed) three times that signals50%-90% battery;
LED Indicator flahes in blue three times that signals full battery ( higher than 90% battery).
5.Charging: LED Indicator stays in solid red when charging is under way; and LED Indicator stays in solid green when battery
is full.
Pairing Blu-PTT+ with Zello
