10 www.dellonda.co.uk
11) Ensure that the drain caps are properly
closed before filling the spa.
12) Smooth wrinkles out of the bottom of the
spa, then fill the spa to the level indicated. Your
spa is ready for use.
WARNING : DO NOT
leave spa unattended
while filling with water. Make sure the drain
fitting is plugged securely and the cap is in
place. Start filling the spa with water. After
about 1-inch of water is on the bottom, stop
filling and smooth wrinkles out of the bottom
of the spa. Pull the outer wall out from the top
edge, all around the bottom of the spa, so that
it fills evenly. Continue filling the spa to the level
indicated.
Control Panel
Functions
• Once powered-up, the
LED
displays the current
water temperature automatically.
• The temperature units selector changes the
temperature units from Celsius to Fahrenheit.
• Press the temperature adjustment buttons,
then the screen will flash. When it
is flashing, you can set the desired
temperature. The value will
increase or decrease 1 degree at a
time. The temperature could be
set between 30°C to 40°C (86°F to
104°F).
• To lock or unlock the control
panel, press the Lock button and
hold 3 seconds.
1
Filtration
2
Heat Button
3
Massage Button
4
Lock Button
5
LED Display
6
Temperature Units Indicator
7
Temperature Decrease Button
8
Temperature Unit Selection
9
Temperature Increase Button
