-3-
English
Package content
• External enclosure M.2
• Screwdriver
• Mounting material
• Cable USB-C™ male to USB-C™ male, length ca. 45 cm
• User manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
• Avoid anti-static electricity when installing the SSD
Hardware Installation
1.
Open the enclosure with the help of the supplied screwdriver.
Just remove the two screws on the side of the USB connector
and remove the panel.
2.
Pull out the PCB.
3.
Now you plug your M.2 SSD into the slot.
4.
Fix the module with the help of the screws.
5.
Slide the PCB with the module into the enclosure.
6.
Close the enclosure. Use the screws to attach the panel to the
housing.
7.
Connect the USB cable with the enclosure and a free USB port
of your computer.
Driver Installation
1.
Switch on your computer.
2.
The external drive will be recognized and you can start using
the device immediately.
