20
H
ow to dehumidify (dehumidification only function)
1) Plug the appliance into a mains socket.
2) The display shows “
- -
“ to indicate that the appliance is in standby and therefore ready for
operation. If the message “
Ft
”is displayed, empty the tank or position it correctly.
3) Press the ON/OFF button.
4) Press the “
mode
” button and choose the dehumidification function (“
” indicator light
on). The display shows the relative humidity set point.
5) Press the “
+
” or “
-
” button to set the desired humidity (30% means a dry environment, 80%
a humid environment).
6) Press the “
power level
” button to select the desired dehumidification power level
(MIN/MAX).
7) Press the “
” button to display, in sequence, the ambient relative humidity (“
” indicator
light flashing) and the ambient temperature (“
” indicator light flashing).
8) When the appliance reaches the humidity set point, it will stop and the periodical ventila-
tion function will start, so as to ensure a correct relative humidity reading. As soon as the
humidity increases above the set point, the appliance will automatically resume dehumidi-
fication operation.
H
ow to use as a ventilator
1) Plug the appliance into a mains socket.
2) The display shows “
- -
“ to indicate that the appliance is in standby and therefore ready for
operation. If the message “
Ft
” is displayed, empty the tank or position it correctly.
3) Press the ON/OFF button.
4) Press the “
mode
” button and choose the purification function (“
” indicator light on). The
display shows “
FN
”.
5) Press the “
” button to select the desired heating power level (MIN/MAX).
C
OMFORT function
This is an automatic dehumidification function. In this mode, on the basis of room temperatu-
re, the appliance establishes the ideal level of well-being and power level to use.The display
shows “
C
C t
t
”. Neither the humidity nor the power level can be changed.
S e l e c t i n g t h e f u n c t i o n s
