background image

21

ENGLISH

C l e a n i n g / W a r n i n g s

M

aintenance

Always unplug the appliance from the power socket before performing any cleaning or maintenance
operations. 
For safety reasons, never wash the dehumidifier using a jet of water.

C

leaning the cabinet

• Clean the appliance using a damp cloth then dry with a dry cloth.
• Never use petrol, alcohol or solvents to clean the appliance.
• Never spray the appliance with insecticides or similar. These could cause the paint to flake

or plastic parts to warp.

C

leaning the air filter

If the filter is dirty, air circulation is compromised and the efficiency of the dehumidifying and
air purifying functions decreases. It is therefore good practice to clean the filter at regular inter-
vals. The frequency depends on the duration and conditions of operation.
• -It is good practice to clean the filter every week.
• -To remove the air filter, pull it out (Fig. 4).
• -Use a vacuum cleaner to remove dust accumulations from

the filter. If the filter is very dirty, wash in warm water and
rinse several times. 
The temperature of the water must not exceed 40°C. 
After washing the filter, allow it to dry completely before
repositioning it.

I

f the appliance is not used for long periods

• After having unplugged the appliance from the power

socket, empty the tank. 

• Clean and reposition the filter.
• Cover the appliance with a plastic bag so that dust does

not build up.

fig. 4

Summary of Contents for DE250E












Reviews: