background image

11

LIGHT

MEDIUM

STRONG

X-STRONG

(see "7.4 Making coffee 
using pre-ground coffee")

After delivering the beverage, the aroma setting is reset to the 

 

value.

7.3  Selecting the coffee quantity

Press the 

 button (C1):

 

Custom (if programmed) / 
Standard
SMALL SIZE

MEDIUM SIZE

LARGE SIZE

EXTRA-LARGE SIZE

After delivering the beverage, the quantity setting is reset to the 

 value 

7.4  Making coffee using pre-ground coffee

Important!  

•  Never add pre-ground coffee when the machine is off or it 

could spread through the inside of the machine and dirty 

it. This could damage the machine.

•  Never use more than 1 level measure (D2) as it could soil 

the inside of the coffee machine or block the funnel (A4).

•  When using pre-ground coffee, only one cup can be made 

at a time.

1.  Press the 

 button (C6) until "

" (ground) is 

displayed.

2.  Open the pre-ground coffee funnel lid (A2).
3.  Make sure the funnel(A4) is not blocked, then add one level 

measure of pre-ground coffee (fig. 12).

4.  Place a cup under the coffee spouts (A9).
5.  Then select your required coffee:

•  ESPRESSO

•  LONG

•  COFFEE 

6.  Preparation begins. An image of the selected beverage 

appears on the display, together with a progress bar which 
gradually fills as preparation proceeds.

Once the coffee has been delivered, the machine will be ready 
for further use.

Important!  Making LONG coffee

:

Halfway through preparation, the message "ADD GROUND COF-
FEE" "MAX. ONE MEASURE" is displayed. Add one level measure 
of pre-ground coffee and press 

.

7.5  Adjusting the coffee mill

The coffee mill is set by default to prepare coffee correctly and 
should not require regulating initially. 
However, if after making the first few coffees you find that the 
coffee is either too weak and not creamy enough or delivery is 
too slow (a drop at a time), this can be corrected by adjusting 
the grinding adjustment dial (A5) (fig. 13).

Please note! 

The grinding adjustment dial must only be turned when the 
coffee mill is in operation during the initial phase of coffee 
preparation.

If the coffee is delivered too slowly or not 
at all, turn one click clockwise towards 7.
For fuller bodied creamier coffee, turn 
one click anticlockwise towards 1 (do 
not turn more than one click at a time 
otherwise the coffee could be delivered 

a drop at a time). 
These adjustments will only be evident after at least 2 cups of 
coffee have been delivered. If this adjustment does not produce 
the desired result, turn the dial another click.

7.6  Tips for a hotter coffee

For hotter coffee, proceed as follows:

•  perform a rinse cycle by selecting the "Rinsing" function in 

the settings menu (section "6.3 Rinse 

");

•  warm the cups with hot water using the hot water function 

(see section"10. 

D

Delivering hot water");

•  increase the coffee temperature in the settings menu 

"

"(C3) (see section "6.9 Coffee temperature  ").

8. 

MAKING CAPPUCCINOS AND MILK-

BASED COFFEES

Please note! 

To avoid milk with poor froth or large bubbles, always clean the 
milk container lid (E2) and hot water connection nozzle (A8) 
as described in sections "8.4  Cleaning the milk container after 
use", "13.10 Cleaning the milk container" and "13.11 Cleaning 
the hot water nozzle". 

Summary of Contents for Dinamica Plus ECAM37X.95



























Reviews: