22
DISPLAYED MESSAGE
POSSIBLE CAUSE
REMEDY
PRESS OK TO CLEAN OR TURN
DIAL
:
The milk container has been inserted with
the froth adjustment dial (E1) in the CLEAN
position.
To proceed with the CLEAN function, press the
selector corresponding to "OK", or turn the froth
adjustment dial to one of the milk positions.
TURN MILK FROTH
ADJUSTMENT DIAL TO CLEAN
POSITION
CLEAN
Milk has been delivered recently and the tubes
inside the milk container (E) must be cleaned.
Turn the froth adjustment dial (E1) to CLEAN
(fig. 19).
TURN FROTH ADJUSTMENT
DIAL
The milk container has been inserted with
the froth adjustment dial (E1) in the CLEAN
position.
Turn the dial to the required froth position.
DESCALING NEEDED
PRESS OK TO START
(~45MIN)
The machine must be descaled.
Press the selector corresponding to "OK" to
start descaling or "ESC" to descale later. The
descaling procedure described in section "14.
Descaling" needs to be performed.
REPLACE WATER FILTER
PRESS OK TO START
The water softener filter (D7) is exhausted.
Press the selector corresponding to "OK" to re-
place or remove the filter, or "ESC" to carry out
the procedure later. Follow the instructions in
section "16. Water softener filter".
Summary of Contents for Dinamica Plus ECAM37X.95
Page 1: ...De Longhi Appliances via Seitz 47 31100 Treviso Italy www delonghi com 5713238071_00 _0718 ...
Page 4: ...3 A A2 A1 A5 A4 A3 A6 A7 A22 A21 B C A8 A9 A12 A17 A18 A11 A10 A14 A15 A13 A16 A20 A19 ...
Page 5: ...4 4 3 3 1 7 6 5 12 9 15 MILK 10 13 1 2 11 16 14 8 ...
Page 6: ...5 25B 25A 27 17 31 30 21 19 28 26 29 P U S H 22 24 P U S H P U S H CLEAN 18 20 23 32 ...