25
PROBLEM
POSSIBLE CAUSE
REMEDY
At the end of descaling, the appliance
requests a third rinse
During the two rinse cycles, the water
tank (A17) has not been filled to the
MAX level
Follow the instructions displayed by the appli-
ance, but first empty the drip tray (A15) to avoid
the water overflowing.
Milk does not flow from the milk
spout (E5)
The milk container (E) lid (E2) is dirty
Clean the milk container lid as described in sec-
tion "13.10 Cleaning the milk container".
The milk contains large bubbles and
squirts out of the milk spout (E5) or
there is little froth
The milk is not cold enough or is not
semi-skimmed or skimmed.
Use skimmed or semi-skimmed milk at refrig-
erator temperature (about 5° C). If the result is
not as expected, try a different brand of milk.
The froth adjustment dial (E1) is incor-
rectly adjusted.
Adjust following the instructions in section "8.
making cappuccinos and milk-based
coffees".
The milk container lid (E2) or froth ad-
justment dial (E1) are dirty
Clean the milk container lid and dial as de-
scribed in section "13.10 Cleaning the milk
container".
The hot water connection nozzle (A8)
is dirty
Clean the connection nozzle as described in
section "13.11 Cleaning the hot water nozzle".
The machine emits noises or small
puffs of steam while not in use
The machine is ready for use, or has re-
cently been turned off, and condensate
is dripping into the hot vaporiser
This is part of normal operation. To limit the
phenomenon, empty the drip tray.
Summary of Contents for Dinamica Plus ECAM37X.95
Page 1: ...De Longhi Appliances via Seitz 47 31100 Treviso Italy www delonghi com 5713238071_00 _0718 ...
Page 4: ...3 A A2 A1 A5 A4 A3 A6 A7 A22 A21 B C A8 A9 A12 A17 A18 A11 A10 A14 A15 A13 A16 A20 A19 ...
Page 5: ...4 4 3 3 1 7 6 5 12 9 15 MILK 10 13 1 2 11 16 14 8 ...
Page 6: ...5 25B 25A 27 17 31 30 21 19 28 26 29 P U S H 22 24 P U S H P U S H CLEAN 18 20 23 32 ...