background image

4. HOW TO PREPARE COFFEE…

USER MANUAL

21

HOW TO PREPARE COFFEE… USING COFFEE BEANS

… using coffee beans

A. Press the ON button  (24): 

the appliance

warms up and automatically performs a pre-
wash cycle. The appliance on (

25

) and tem-

perature (

28

) indicators flash during heating.

B.

Rotate the container (

5)

into the position for

using coffee beans (check indicator 

1

).

It is normal for the appliance to make a noise when turned on, when the coffee container (5) moves or
when it is turned off. 

The noise indicates that the dspout assembly is moving into the correct position for

the function set.
When turned on and off, the appliance also rinses the internal circuits.

When the on (

25

) and temperature (

28

) indicators stop flashing, the appliance

has reached the ideal temperature and is ready to make coffee. Put the cup (if

A

B

D

E

D. Select the strength of coffee required by

pressing the button (32). 

The relative indica-

tor (

31

) lights up. 

E. Select the quantity of coffee by pressing the

button (33). 

The relative indicator (

34

) lights

up.

If the coffee delivery button (38 or 37) is not pres-
sed 

within 8 seconds

of setting D and E, the

F/G.Press the coffee delivery button: 

if you want

just one coffee, press button 

38

(

F

), if you

want two cups at the same time, press button

37

(

G

).

You can interrupt coffee delivery at any moment
by briefly pressing the same coffee delivery but-
ton as pressed previously.

F

G

Your appliance is equipped with an automatic 

pre-infusion system

which moistens the ground coffee; con-

sequently delivery begins and then stops for a moment.
This releases the full aroma of the ground coffee to obtain the best possible coffee. Pre-infusion does not
take place when making very long coffee.

C.

Remove the lid (

4

) of the coffee bean container (

5

) and fill with fresh coffee

beans (capacity 270 g). Replace the lid to close the container well. 
Only pure coffee beans should be used, without the addition of caramelised
or flavoured beans.

C

appliance automatically returns to the original setting.

you want to make one cup) or cups (if you want to make two cups) under the spout (

14)

.

GB

GB OK  27-09-2002  8:13  Pagina 21

Summary of Contents for EC 200.CD















Reviews: