background image

USER MANUAL

22

HOW TO PREPARE COFFEE… USING GROUND COFFEE

…using ground coffee
A. Press the ON button (24): 

the appliance warms

up and automatically performs a pre-wash
cycle. The appliance on (

25

) and temperature

(

28

) indicators flash during heating.

B. Rotate the container (5) into the position for

using ground coffee (check indicator 1). 

The

coffee quantity indicator (

34

) flashes.

A

B

It is normal for the appliance to make a noise when turned on, when the coffee container (5) moves or
when it is turned off. 

The noise indicates that the spout assembly is moving into the correct position for the

function set.
When turned on and off, the appliance also rinses the internal circuits.

When the on (

25

) and temperature (

28

) indicators stop flashing, the appliance has reached the ideal tem-

perature and is ready to make coffee. Put the cup (if you want to make one cup) or cups (if you want to
make two cups) under the spout (

14

).

Preparing the right quantity of coffee to use

To  prepare the right quantity of ground coffee,
you can use either the measuring cup (

3

) or mea-

sure (

22

). 

Measures other than those provided

must never be used and you must never use
more than two measures 

(corresponding to the

MAX quantity on the measuring cup).

Important: the funnel is not a container. Make sure
all the ground coffee introduced feeds down into
the container. If necessary, use the handle of the
measure (22) to help the coffee flow towards the
spout assembly.

=

=

1 coffee =

2 coffees=

D

E

F

C

Remove the cover (

2

) and slowly introduce the

exact quantity of ground coffee necessary
for each preparation

into the ground coffee

funnel.

D. Select the strength of coffee required by

pressing the button (32). 

The relative indica-

tor (

31

) lights up.

E/F: if you want just one coffee, press button 38

(E), 

if you want two cups at the same time,

press button 37 (

F

).

You can interrupt coffee delivery at any moment by
briefly pressing the same coffee delivery button as
pressed previously.

You must never use soluble instant coffee, free-
ze-dried coffee or similar products, but only
pure ground coffee without additional ingre-
dients.

C

GB OK  27-09-2002  8:13  Pagina 22

Summary of Contents for EC 200.CD















Reviews: