Living innovation
Cappuccino and
Espresso Coffee Maker
EC11
10
possible that after a few months of use, coffee residues or scale can
clog the holes in the disc: clean it with a damp sponge (Fig. 13).
- There is no water in the boiler tank: fill the tank completely using
the relevant measure, as explained in the paragraph “Successive use”.
- Uneven dispensing from the two dispenser holes could be caused by
overfilling of the coffee filter, or by coffee that is too finely ground or
pressed.
The indicator light does not switch on:
- The power cord is not connected to the power mains. Make sure
that the appliance is plugged in correctly.
- It is possible that the boiler tank is not functioning correctly: if the
problem persists after you have followed the above procedure, con-
tact an Authorised Assistance Centre.
Coffee is too watery and cold:
- The coffee blend has been ground too coarsely: for a more concen-
trated, hotter coffee, it is best to use a more finely ground blend.
We also recommend pre-heating the coffee cups by rinsing them in
hot water.
YOU_ME_DeLonghi.qxp 22-05-2006 15:15 Pagina 10
