7
Living innovation
Cappuccino and
Espresso Coffee Maker
EC11
milk is ready following the direction of rotation of the device (3) as
shown in (Fig. 9). During steam dispensing the sound signal may go
on and off, indicating that the boiler is maintaining its temperature.
The steam jet shuts off automatically as the MAXI CAPPUCCINO
device is brought back into its original position by pushing it back
using the milk container (Fig.10).
- Once steam dispensing has finished, move the power lever (7) back
to the upright position (Fig. 7) and, using a sponge, clean all residues
of the liquid heated from the MAXI CAPPUCCINO device.
- If the steam pressure should be insufficient for frothing the milk, fill
the boiler again following the procedures described in the paragraph
“Successive use”.
For the best results, we recommend that you prepare the coffee
before frothing the milk.
If the coffee has not already been prepared:
- Fill the boiler tank (as explained in the section entitled ”Making cof-
fee”) and move the power lever (7) to the pre-heat position (Fig. 5).
The indicator light (8) will switch on.
- When the front indicator light switches off, indicating that that tem-
perature inside the boiler tank has reached the optimum level, the
appliance will emit a sound signal. Then place the container of milk
to be foamed (or liquid to be heated) under the MAXI CAPPUCCI-
NO device (3) and press the steam button (4) until the liquid is hea-
ted or foamed as required (Fig. 11). To make this operation easier,
position the device in the fixed position with the help of the contai-
ner itself, rotating the device (3) forward as shown in Fig. 9. During
steam dispensing the sound signal may go on andoff indica-
ting that the boiler is maintaining its temperature.
- To stop the jet of steam, release the button (4) or bring the MAXI
CAPPUCCINO device back to its original position by rotating it
back as shown in Fig. 10.
- Return the lever to its upright position (Fig. 7), and using a sponge,
clean all residues of the heated liquid from the MAXI CAPPUCCI-
NO device.
WARNING:While dispensing steam, always take care never to place
your hands beneath the MAXI CAPPUCCINO device, which issues a
hot jet of steam. Risk of scalding.
- After dispensing steam, water residues may continue to come out
from the MAXI CAPPUCCINO device (3). To avoid wetting the sur-
face on which the appliance stands, open the drip tray (5), by pres-
sing your finger on its right-hand side (Fig. 12).
Fig. 12
YOU_ME_DeLonghi.qxp 22-05-2006 15:15 Pagina 7
