DeLonghi F14427CZ, Instructions Manual

Filling with oil or fat

•

Remove the cover lifting it by the handle.Turn the folding han-
dle of the basket until it locks into place (pos. 2, fig. 1 ).
Remove the basket by lifting it upwards.

•

Remove the length of cable required to connect the appliance
to the mains, from the cable compartment (fig. 2).

•

If oil is used, pour it into the bowl. (fig. 3).

Warning:The level must always be between the maxi-
mum and minimum levels indicated

. Never exceed max

limit, as oil may overflow from the container.

Never use the deep fryer when the oil is below the
“min” level as it could cause the thermal safety device
to come into operation; to replace it you need to con-
tact one of our service centres.

Best results are obtained by using a good quality oil. Avoid
mixing different types of oil. If you use lumps of solid fat, cut
them into small pieces and melt them in another container,
then pour the liquefied fat into the deep fryer bowl. Never
melt the fat in the basket or on the deep fryer heating element
(fig. 4).

•

Close the cover.

Manual setting

•

Plug the appliance; the deep fryer emits a “beep” and the tem-
perature 160° (or the last selected temperature) is displayed.

•

Use the 

Celsius/Fahrenheit Button

to select the desired

scale (°C or °F).

•

Use the 

Temp/Time Button

to select temperature and time

of frying.

•

Use the 

+ (plus)/-(minus) Buttons

to set the temperature

from 100 to 190°C.The temperature will increase or decrease
by 5°C, pressing the 

+ (plus)/-(minus) Buttons.

•

Use the 

+ (plus)/-(minus) Buttons

to set the time of cook-

ing from 0 to 60 minutes.The time will increase or decrease by
1 minute, pressing the 

+ (plus)/-(minus) Buttons.

Preheating

•

Once set time and temperature, push the      

On/Off Button

.

If the time has not been set, the deep fryer will not start the
heating process.The deep fryer starts heating: the “heating”
light switches on and the display shows “

HEATING

”.You can

modify time and temperature by pressing the 

Temp/Time

Button

and then the 

+ (plus)/-(minus) Buttons

.

As soon as the temperature is reached, the “heating” light
switches off and the display shows “

READY

”; the fryer emits 5

“beeps”.

Note:

the heating element works for 30 minutes and then switches

off.

fig. 1

fig. 2

fig. 3

Electric deep fryer

4

fig. 4