11
touch and hold the ON/STANDBY (A) button on the unit for at
least 10 seconds until you hear a long beep.
The filter is designed to last up to 9 months, based on 8 hours
usage a day, at medium working load.
Please note:
the indicator is a guide and you may
need to replace the filter more frequently, depending on the
air quality conditions.
PROBLEM
CAUSE
SOLUTION
The display shows "
pf
" and emits
a beep
Temperature sensors are not working
properly
Please contact Customer Service
Product doesn’t turn on
Check that the plug is connected to the
outlet
The set temperature has been reached
or the time set on the timer has elapsed
Plug in
Use the “+” button to increase the set
temperature
The appliance goes off unexpectedly
Check that the plug is connected to the
outlet
The set temperature has been reached
or the time set on the timer has elapsed
Plug in
Use the “+” button to increase the set
temperature or turn off timer function.
A dot is flashing on display, emits a
beep and unit is off
The tip-over switch has been activated Use the “+” button to increase the set
temperature or turn off timer function.
Make sure the appliance is standing up-
right on a flat surface. If the appliance
doesn’t work please contact Customer
Service
TROUBLESHOOTING
