12
TM
The display shows "
cf
"
The filter has reached the pre-defined
number of hours
Replace the filter and reset the alarm.
To reset the
CF
alarm, in rapid
succession insert the plug and touch
and hold the ON/STANDBY (A) button
on the unit for at least 10 seconds until
you hear a long beep.
The display shows "
H
t
" or "
I
t
" blinking
The internal temperature is too high.
The air intake or outlet grill is
obstructed
Check the appliance is correctly
positioned respecting the minimum
distances from the wall, or objects, as
indicated in the instruction manual, if
not, position the appliance correctly
Remove the obstruction
Disconnect the plug from the outlet
and let the appliance cool down. After
few minutes plug the appliance again.
If the appliance doesn't work please
contact Customer Service
The display shows "
Fi
"
The fan motor does not work
Disconnect the plug from the outlet.
After few minutes plug the appliance
again. If the problem persists please
contact Customer Service
