background image

4

5

IMPORTANT 

INSTRUCTIONS

When using any electrical appliance, some basic safety pre-
cautions should always be observed to reduce the risk of fire, 
electric shock, and/or injury to persons. Read all instructions 
carefully before using the appliance. Specifically:

 Danger!

Failure to observe the warning may result in life threatening 

injury by electric shock. 

Do  not  operate  any  heater  with   a 

damaged cord or  plug or  after  the 

heater malfunctions, has been dropped 

or damaged in any manner. Return 

heater to  authorized service facility for 

examination, electrical or mechanical 

adjustment, or repair.

-   This  heater  is  not   intended  for  use in bath-

rooms,  laundry  areas and similar indoor lo-

cations. Never locate heater where it may fall 

into a bath tub or other water container.

-   Do not  use this  heater in  the immediate sur-

roundings of a bath, a shower or a swimming 

pool.

-  When using the appliance, make sure that the 

switch or other control devices are not within 

reach of persons in the bath or shower.

-  Do not insert or allow foreign objects to enter 

any ventilation  or exhaust opening as this 

may cause an electric shock, fire, or damage 

the heater.

CAUTION:  to   prevent   electric  shock 

match wide blade of plug to wide slot, 

then fully insert.

-  CAUTION: In order to avoid a hazard due to 

inadvertent resetting of thermal cutout, this 

appliance must not be supplied through an 

external switching   device,  such as a timer, 

or  connected to  a  circuit  that  is regulary 

switched on and off by the utility.

-   This heater may include an visual alarm to 

warn that  parts of the heater are getting 

excessively hot.  If  the  alarm  flashes, imme-

diately turn the heater off and inspect for any 

objects on or adjacent to the heater that may 

cause high  temperatures. DO NOT OPERATE 

THE HEATER WITH  THE ALARM FLASHING.

  Important! 

Failure to observe the warning could result in injury or 

damage to the appliance. 

-  The appliance  is  not  intended for  use by 

persons (including  children)  with  reduced 

physical, sensory ormental  capabilities, or 

lack of experience and knowledge, unless 

they have been given supervision or instruc-

tion concerning use of the appliance by a 

person responsible for their safety. Children 

should be supervised to ensure that they do 

not play with the appliance.

-  Extreme caution is necessary when any heat-

er is used by or near children or invalids and 

whenever  the heater is left operating and 

unattended.

-   Always unplug heater when not in use.

-   Use this  heater  only  as described in  this 

manual.  Any other  use not  recommended 

by the manufacturer  may cause fire, electric 

shock, or injury to persons.

-   The heater must not be located immediately 

below a socket-outlet.

-   To prevent  overload  and  blown  fuses, be 

sure that no other appliance is plugged into 

the same outlet  (receptacle) or into another 

outlet (receptacle) wired into the same cir-

cuit.

-  Be sure that the plug is fully inserted into an 

appropriate  outlet. Please remember  that 

outlets also deteriorate due to aging and 

continuous use: check periodically if signs of 

overheating or deformations are evi-denced 

by the plug. Do not use the outlet and CALL 

your electrician.

 

Danger of burns!!

Failure to observe the warning could result in burns or scalds.

-  This heater is  hot  when  in  use. To avoid 

burns, do not let bare skin touch hot surfaces. 

Use handle when moving  this heater. Keep 

Summary of Contents for HFX85W15C














Reviews: